What a Wireless Subwoofer Transmitter Does
A wireless subwoofer transmitter is a dedicated accessory that sends audio from your source or amplifier to a subwoofer without a long cable run. It replaces the physical interconnect between the subwoofer output on your preamp, receiver, or integrated amplifier and the subwoofer's input. The PS Audio Wireless Transmitter for Subwoofer (SKU 39-470001) is one example of this type of accessory, designed specifically for subwoofer duty.
Step-by-Step Setup
The following steps assume you have a wireless transmitter and receiver pair. The process is similar for most dedicated subwoofer wireless kits.
- Place the transmitter near your amplifier or receiver: Position the transmitter so it can connect to the subwoofer output on your source component. The transmitter needs to be within cable reach of that output.
- Connect the transmitter to the subwoofer output: Use a standard RCA cable to connect the subwoofer output on your preamp, receiver, or integrated amplifier to the input on the transmitter. This is the only wired connection needed for the subwoofer signal.
- Place the receiver near the subwoofer: The receiver (often built into a small box or a dongle) should be close enough to the subwoofer to connect with a short RCA cable. Ensure the receiver is within the transmitter's specified range (check your product's documentation).
- Connect the receiver to the subwoofer: Plug the receiver into the subwoofer's line-level input using another RCA cable. If your subwoofer has left/right inputs, you can use either one; the subwoofer will sum the signal internally.
- Power on and pair the devices: Plug the transmitter and receiver into AC power. Most wireless subwoofer kits pair automatically when powered on. If not, follow the manufacturer's pairing procedure (often a button press on each unit).
- Test the connection: Play audio with bass content and confirm the subwoofer produces sound. Adjust the subwoofer's volume and crossover settings as needed. If no sound, check that the transmitter is receiving signal and that the receiver is properly connected.
Product Facts for the PS Audio Wireless Transmitter
- Wireless Transmitter for Subwoofer: The PS Audio Wireless Transmitter for Subwoofer is a dedicated accessory for sending audio wirelessly to a subwoofer, offered under SKU 39-470001 in the Standard configuration. Knowing the exact SKU helps you confirm you are ordering the correct accessory for your system. The Standard configuration is the only variant available.

Wireless Transmitter for Subwoofer
Placement Tips for Reliable Wireless Performance
For best results, keep the transmitter and receiver within line of sight if possible. Avoid placing them inside metal cabinets or directly behind large metal objects, as these can block the wireless signal. The supplied information does not specify a maximum range, so consult your product manual for distance limits. If you experience dropouts, try moving the transmitter or receiver to a different location.
System Compatibility Considerations
A wireless subwoofer transmitter works with any system that has a line-level subwoofer output. This includes most home theater receivers, stereo integrated amplifiers with a subwoofer pre-out, and preamplifiers with a dedicated subwoofer output. The transmitter does not require any special configuration on the source device—just a standard RCA connection. It is not designed for use with high-level (speaker wire) subwoofer inputs unless you have a converter.


